15
manually. The Year information is not in the CID record.
7.3.2 Auto ANS Intercom
When it is set to on, the base will auto answer the intercom call when it receives an intercom call.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
AUTO ANS INTERCOM
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
NOTE
The default setting is
OFF
.
7.3.3 Tone/Pulse Dial
The Dial Mode of Line 1 and Line 2 can be set individually for each line.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
TONE/PULSE DIAL
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
LINE 1
or
LINE 2
and press
SELECT
softkey.
3. Using
VOL +
and
VOL -
of the navigation button to scroll to
TONE
or
PULSE
.
4. Press
SELECT
softkey to save your selection.
7.3.4 Area Code
The telephone uses the pre-programmed area code to determine the number format to display
when a valid Caller ID record is received. The pre-programmed area code is also used for the
Dialing Back feature.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
AREA CODE
. Press
SELECT
softkey.
2. Using the dial pad to enter your 3-digit area code.
3. When you are finished, press
SAVE
softkey.
7.3.5 Registration
A cordless handset accessory will not operate until it is registered to the base.
During the registration process, keep the cordless handset near the base. Up to 10 cordless
handsets (in total) can be registered to one base.
Please refer to the User Guide of Motorola multi-line cordless handset accessory for instructions
on setup and use.
7.3.6 Remove Handset
De-registration cancels registration.
During the de-registration process, keep the handset near the base.
It is not recommended that a handset be deregistered unless absolutely necessary because once a
handset is deregistered, that handset’s telephone features cannot be used until the handset is
re-registered.
From the
PHONE SETTINGS
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
REMOVE HANDSET
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to the cordless handset you wish to
remove and press
SELECT
softkey.
3. The screen will display
REMOVE HANDSET?
4. Press
YES
softkey to confirm de-registration. The cordless handset will display
PRESS “REG” TO
INITIATE REGISTRATION
once the handset is de-registered.
7.3.7 2nd Call Alert
When it is set to on, you will hear the alert tone when you are in conversation and there is an
incoming call from another line.
