Motorola MG8702 User Manual Download

Page: 77 / 78

Compliance

FCC Statement
This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures: reorient or relocate the receiving antenna, increase the

separation between the equipment and receiver, connect the equipment

into an outlet on a circuit different from that to which the receiver is

connected, and/or consult the dealer or an experienced radio/TV

technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment and it also complies with Part 15 of the FCC

RF Rules. This equipment must be installed and operated in accordance

with provided instructions and the antenna(s) used for this transmitter

must be installed to provide a separation distance of at least 20cm from

all persons and must not be co-located or operating in conjunction with

any other antenna or transmitter. End-users and installers must be

provided with antenna installation instructions and consider removing

the no-collocation statement.

This device complies with Class B Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Summary of Contents for MG8702















































































Search results

Summary of Contents for MG8702

Reviews:

Related manuals for MG8702

Brands by name

Popular brands

Motorola MG8702, User Manual

Search results

Summary of Contents for MG8702

Reviews:

Related manuals for MG8702

Brands by name

Popular brands