Motorola MG8702 User Manual Download

Page: 16 / 78

When you log in for the first time the first time Wireless Setup screen

will appear. (If you have already connected using the MotoManage app,

this screen may not appear). If this screen doesn’t appear, please see

the Troubleshooting Tips below. (See below under WiFi Setup if you

want to keep your current network name and password and if you

haven’t used the app to do that.)

NOTE:

To reduce the risk of unauthorized access, your MG8702 is

designed to accept access via secure http (https) only. To

support secure access, your MG8702 includes a self-signed

certificate. Unfortunately, web browsers flag self-signed

certificates as insecure.

This means that if you open the MG8702 Configuration Manager,

your browser will display warnings that the site is insecure. The

MG8702 Configuration Manager is secure, so you can safely

ignore those warnings.

For more detailed information about the MG8702 and its Configuration

Manager, please see www.motorolanetwork.com/MG8702manual.

Summary of Contents for MG8702















































































Search results

Summary of Contents for MG8702

Reviews:

Related manuals for MG8702

Brands by name

Popular brands

Motorola MG8702, User Manual

Search results

Summary of Contents for MG8702

Reviews:

Related manuals for MG8702

Brands by name

Popular brands