manualshive.com logo in svg

Motorola MC2100 Series, User Manual

Share
Download
Motorola MC2100 Series User Manual Download Page 57

CHAPTER 5 WIRELESS APPLICATIONS

Introduction

Wireless Local Area Networks (LANs) allow mobile computers to communicate wirelessly and send captured 
data to a host device in real time. Before using the MC21XX on a WLAN, the facility must be set up with the 
required hardware to run the wireless LAN and the MC21XX must be configured. Refer to the documentation 
provided with the access points (APs) for instructions on setting up the hardware.

To configure the MC21XX, a set of wireless applications provide the tools to configure and test the wireless 
radio in the MC21XX. Refer to the 

Wireless Fusion Enterprise Mobility Suite User Guide for Version X1.00

 for 

information on configuring wireless profiles. Go to 

http://www.motorola.com/enterprisemobility/manuals

 for the 

latest version of this guide. See 

Software Versions on page ii

 to determine the Fusion version on the MC21XX.

Tap the 

Signal Strength

 icon to display the 

Wireless Launcher

 menu.

NOTE

MC2180 only.

NOTE

802.11d is enabled by default. When enabled, the AP must be configured the same in order to 
connect.

PRELIMINAR

ARY

AR

CATIONS

allow mobile compute

allow mobile compute

efore using the MC21

efore using the MC21

eless LAN and the MC

ess LAN and the M

ts (APs) for instruction

) for instruct

he MC21XX, a set of w

he MC21XX, a set of 

MC21XX. Refer to th

MC21XX. Refer to th

on on configuring wire

on on configuring wire

version of this guide. 

sion of this guide. 

ap the 

ap th

Signal Streng

Signal Str

d is enabled by defaul

d is enabled by defau

ect.

ect.

Summary of Contents for MC2100 Series











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands