manualshive.com logo in svg

Motorola MC2100 Series, User Manual

Share
Download
Motorola MC2100 Series User Manual Download Page 19

Getting Started

1 - 3

Figure 1-2

MC21XX Mobile Computer (Back View)

Mobile Computer Startup

To start using the MC21XX:

•

Install the microSD card (optional).

•

Install the main battery.

•

Charge the main battery and the backup battery.

•

Start the MC21XX.

Install microSD Card

The Secure Device (SD) card provides secondary non-volatile storage (the flash memory is slower than RAM). 
The SD card holder is located under the battery.

Exit Window

Mini Stylus

Battery

Speaker

Battery Release Latch

CAUTION

Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the microSD card. 
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the 
operator is properly grounded.

Do not use the microSD card slot for any other accessories.

PRELIMINARY

puter (Back View)

uter (Back View)

LI

rtup

rtup

MC21XX:

MC21XX:

he microSD card (opt

he microSD card (opt

tall the main battery.

tall the main battery.

Charge the main ba

Charge the main ba

•

•

Start the MC21X

rt the MC2

microSD

mic

AR

Mini Stylus

Mini

Speaker

Spe

NA

R

Battery Release

atte

Summary of Contents for MC2100 Series











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands