Almanac Data Output
Function
Outputs current almanac data contained within the Oncore
almout
receiver.
Syntax
almout ([0 | 1])
0 =
outputs almanac once
1 =
outputs almanac upon change
Example
almout 0<ENTER>
Notes
The Oncore receiver outputs the almanac as thirty-four 33-byte
messages. Running the command
record alm
prior to the
Almanac
Data Output
command stores data in Motorola binary format in a
file with extension “.alm”. Use the
run
command to input the
stored almanac data to a receiver. Press F4 to view the Almanac
data screen.
See Also
Input Almanac Data Input (@@Cb)
Record GPS Data (record)
Binary Equivalent
@@Be
Ephemeris Data Input
Function
Used to input ephemeris data one satellite at a time. The entire
ephin
ephemeris data set is input by using the run command.
Syntax
ephin svid byte1 byte2..byte73
Example
ephin 3<ENTER>
Notes
Use the run command with a filename with the .eph extension to
input the entire latest ephemeris data set in one step.
See Also
None
Binary Equivalent
@@Bf
117
Motorola GPS Products
M12 Oncore User’s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS