Almanac Data Input
Function
Manually enters an almanac data message into the Oncore
almin
receiver.
Syntax
almin (subframe page byte1, byte2..byte 34)
Example
almin...............<ENTER>
Notes
Inputs an almanac to the Oncore receiver. The almanac consists
of 34 subframe or page messages. A better method of inputting
an almanac is to use the
run xxxxxxxx.alm
command to output
an almanac stored in a receiver file by the
Almanac Data Output
and
Record GPS Data
commands.
See Also
Almanac Data Output (@@Be)
Record GPS Data (record)
Binary Equivalent
@@Cb
Set-To-Defaults
Function
Sets all the Oncore receiver parameters to the factory
default
default values.
Syntax
default
Example
default<ENTER>
Notes
IMPORTANT
: Upon executing this command, the current
almanac loaded in RAM is automatically deleted.
Before using this command, make sure you have made
backup copies (on a separate diskette) of your own
almanac file and/or the almanac file that was provided
with the receiver. The almanac must then be reloaded
after using the
default
command.
See Also
None
Binary Equivalent
@@Cf
119
Motorola GPS Products
M12 Oncore User’s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
