5
iM1100 Wireless Modem Hardware
Charging the Battery
To charge the iM1100 Wireless Modem:
1.
With your modem facing up, plug the accessory connector of the
Travel Charger (included with your modem) into the charging port
on the right side of the modem.
2.
Flip open the charger’s’ prongs.
3.
Plug the charger into an electrical outlet.
The first time you charge the battery, it takes three hours. Subsequent
charges take about two and a half hours.
You can charge the modem battery when the modem is on or off.
Status Light
The LED status light located on the front panel of the iM1100 Wireless
Modem indicates the service state of your modem.
When Using Modem
.
N O T E
Your iM1100 Wireless Modem’s battery must be fully
charged when you install the iM1100 Wireless Modem
Application and Installation Software.
Status Light
iM1100 Modem Status
Flashing Red
Registering. Your modem is registering to your
service providers network. Please wait.
Solid Red
No service. Your modem can’t register with the
network. The modem will continue trying to
register every two minutes until it is powered
off.
Flashing
Amber
Unit registered. No packet data service.
Summary of Contents for iM1100
Page 70: ...66 ...
