31
Using the Modem
3.
To change the inactivity period, enter a new time. To turn the
Inactivation Timer off, uncheck the box.
4.
Click Set.
Running Applications over Packet Data
You can run any standard TCP/IP application during a packet data session.
Connecting to the Internet via Circuit Data
Before attempting to use your iM1100 Wireless Modem to connect to the
internet via circuit data, contact your Internet Service Provider (ISP) for
specific instructions on setting up a modem to access their server.
To make a circuit data connection using your iM1100 Wireless Modem:
1.
Open the Dial-Up Networking window. The steps you take to access
this window and the exact look of this window depend on your
operating system.
2.
From the Dial-Up Network window, double-click Make New
Connection.
3.
Follow the instructions presented by the installation wizard.
N O T E
When a packet-data session is active, any software
specifically configured for use with other service providers
may need to be reconfigured for use with your service
provider.
Summary of Contents for iM1100
Page 70: ...66 ...
