19
Setting Up Your Modem
11. The Add RAS Device window opens. Ensure the COM port for your
iM1100 Wireless Modem is selected from the drop-down list. Then
click OK.
12. The Remote Access Setup window now shows the added COM port.
Verify that the iM1100 Wireless Modem was added to the list of
RAS devices, verify that TCP/IP is the only dial out network
protocol. Then click Continue.
13. In the Network Services Selection window, click Close.
14. The Network Settings Change window opens prompting you to
restart your laptop. Click Yes to restart.
15. When the welcome window opens, follow the steps in “Completing
the Installation” on page 20.
Summary of Contents for iM1100
Page 70: ...66 ...
