88
Wireless Data Services
Restore User Defaults
DCD Behavior
Z
This command causes the modem to reset all parameters and
S-registers to their user-defined default values. There are three
sets of user defaults. The parameter selects between which set
(or image) is being requested.
Action
ATz<image>
Query
Range
Parameter Values:
0
Load user image 0
1
Load user image 1
2
Load user image 2
&C
This parameter determines how the DCD line (circuit 109)
relates to the detection of received line signals from the distant
end. Changing the parameter takes effect immediately in both
the command and online command states.
Action
AT&c<setting>
Query
AT&v
Range
Parameter Values:
0
DCD always on
1
The modem turns on the DCD to indicate the
presence of a connection, and turns off the DCD
to indicate the loss of a connection.
Summary of Contents for IDEN WIRELESS DATA SERVICES
Page 2: ......
