Motorola GP68, Service Manual

Page: 51 / 85

March, 1997 6881086C09-O
4-11
GP68 Portable Radios Service Manual Radio Programming Information
Special Programming Mode (SPM)
A flashing channel number indicates that the channel is
excluded from the scan list. A channel number that lights
continuously indicates the channel is included in the scan
list. For example, a display showing
with flashing dig-
its indicates that channel 18 is excluded from the scan list.
Press the Enter Button to toggle the state of a channel
in the scan list from included to excluded, or from
excluded to included.
A valid keypress tone sounds when the new set-
ting is stored.
To exit the scan list edit mode, select another menu item
by turning the Channel Selector Knob.
NOTE
In a Full Serial Option Board Configured
Radio, the Channel Scan List can be config-
ured to exclude Full Serial Channels from the
Scan List so that conventional channel scan
can function correctly.
Erase a Single Channel from Memory
Rotate the Channel Selector Knob to select the
menu item.
Use the or the to scroll through the channels
(01 to 20).
A flashing channel number indicates that the particular chan-
nel is unprogrammed (erased). For example, a display show-
ing
with flashing digits indicates that channel 10 is
erased.
To erase a programmed channel (non-flashing channel
numbers), press the Enter Button.
A valid keypress tone sounds when the channel
has been successfully erased.
NOTE
Pressing the Enter Button for an unpro-
grammed channel (flashing channel num-
bers) results in an invalid keypress tone, and
the keypress is ignored.
To exit this edit mode, select another menu item by turn-
ing the Channel Selector Knob.
Edit Time Out Timer
This menu item allows you to select the Time Out Timer
length.
Rotate the Channel Selector Knob to select the ‘Edit
Time Out Timer’ menu item. The menu will display
the current setting:
, where xxx represents one of
The default display of shows
the time out timer setting of one minute.
Use the or the to change the current status.
Select another menu item by turning the Channel Selec-
tor Knob to commit this new setting.
Edit PTT ID
Rotate the Channel Selector Knob to select the
menu item.
Press any key (except the Enter Button) to enter the
PTT ID edit mode. The LCD displays the currently pro-
grammed PTT ID. For an ID which exceeds the length
of the 6-digit display, the rightmost digit flashes to indi-
cate more digits exist on the right.
You can now change or enter numbers as required, up to a
maximum of 8, using any of the numeric keys, as well as the
∗
, #, A, B, C, and D keys. The flashing cursor indicates the
position of the next digit to be entered. You can also enter a
3
4
1
2
MEM
3
Figure 4-21 Special Programming Mode Options.
* Edit Group Call ID
Erase Single Channel
Edit Phone Access Code
* Edit Individual Call ID
Edit Phone De-access Code
Edit PTT ID
* Edit Acknowledgment ID
§
Set SelCall Tone Status
Set Alert Tone Volume
Set Battery Saver Status
Set Accessory Option
Set Battery Type
Set Sidetone Status
(Clockwise Rotation)
(Counter-Clockwise Rotation)
*
Only displays with optional
DTMF Decoder board selected.
§
Only displays with option board selected.
FIRST
ITEM
*
Edit All Call ID
“Beep”
Edit Channel Scan List
Edit Time Out Timer
xxx
†
†
xxx represents , , ,..., .
4
1
xxx
, , ,..., .
2
MEM
3
1
2