Motorola GP68 Service Manual Download Page 63

Page: 63 / 85

Computer Software Copyrights

The Motorola products described in this manual may include copyrighted Motorola computer programs

stored in semiconductor memories or other media. Laws in the United States and other countries preserve

for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to

copy or reproduce in any form, the copyrighted computer program. Accordingly, any copyrighted Motor-

ola computer programs contained in the Motorola products described in this manual may not be copied or

reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase

of Motorola products shall not be deemed to grant, either directly or by implication, estoppel or otherwise,

any license under the copyrights, patents or patent applications of Motorola, except for the normal non-

exclusive royalty-free license to use that arises by operation of law in the sale of a product.

Summary of Contents for GP68






















































































Search results

Summary of Contents for GP68

Reviews:

Related manuals for GP68

Brands by name

Popular brands

Motorola GP68, Service Manual

Search results

Summary of Contents for GP68

Reviews:

Related manuals for GP68

Brands by name

Popular brands