Motorola GP68, Service Manual

Page: 49 / 85

March, 1997 6881086C09-O
4-9
GP68 Portable Radios Service Manual Radio Programming Information
Programming and Option Boards
Receive and Transmit PL/DPL Code
Tables
When selecting a Receive or Transmit PL/DPL code,
Table 4-3, Receive and Transmit PL/DPL Codes, on
page 4-9, gives the PL frequencies, equivalent PL codes (if
applicable) and DPL codes corresponding to the display
rPL.XXX or tPL.XXX where XXX is in the range 001 to
126. rPL.000 and tPL.000 represents Carrier squelch (CSQ)
for Receive and Transmit respectively.
Programming and Option Boards
NOTE
It is not necessary for a Dealer’s radio to have
an option board installed in order to perform
the programming.
If no Option Boards were Installed in the
Dealer’s Radio
• Select the appropriate option board setting via the
Option Board Setup Mode.
• Perform all necessary channel programming func-
tions, including default radio settings, channel set-
tings, and phone numbers.
• Perform any programming of DTMF Selective Call
IDs (if necessary), and configure SPM defaults.
• Clone the programmed settings over to the user
radios.
If an Option Board is Installed in the
Dealer’s Radio
NOTE
In this procedure, you would not be able to
select Signalling Squelch Mode as a channel
default. However, if you do need to do so,
remove the Option Board and follow the steps
outlined in If no Option Boards were
Installed in the Dealer’s Radio.
Table 4-3 Receive and Transmit PL/DPL Codes
rPL.XXX
tPL.XXX PL FREQ
(Hz)
EQUIV.
PL CODE
rPL.XXX
tPL.XXX PL FREQ
(Hz)
EQUIV.
PL CODE
rPL.XXX
tPL.XXX EQUIV.
DPL CODE
rPL.XXX
tPL.XXX EQUIV.
DPL CODE
rPL.XXX
tPL.XXX EQUIV.
DPL CODE
rPL.XXX
tPL.XXX EQUIV.
DPL CODE
000 CSQ - 022 136.5 4Z 043 23 065 152 087 343 109 606
001 67.0 XZ 023 141.3 4A 044 25 066 155 088 346 110 612
002 69.3 WZ 024 146.2 4B 045 26 067 156 089 351 111 624
003 71.9 XA 025 151.4 5Z 046 31 068 162 090 364 112 627
004 74.4 WA 026 156.7 5A 047 32 069 165 091 365 113 631
005 77.0 XB 027 162.2 5B 048 43 070 172 092 371 114 632
006 79.7 WB 028 167.9 6Z 049 47 071 174 093 411 115 645
007 82.5 YZ 029 173.8 6A 050 51 072 205 094 412 116 654
008 85.4 YA 030 179.9 6B 051 54 073 223 095 413 117 662
009 88.5 YB 031 186.2 7Z 052 65 074 226 096 423 118 664
010 91.5 ZZ 032 192.8 7A 053 71 075 243 097 431 119 703
011 94.8 ZA 033 203.5 M1 054 72 076 244 098 432 120 712
012 97.4 ZB 034 206.5 8Z 055 73 077 245 099 445 121 723
013 100.0 1Z 035 210.7 M2 056 74 078 251 100 464 122 731
014 103.5 1A 036 218.1 M3 057 114 079 261 101 465 123 732
015 107.2 1B 037 225.7 M4 058 115 080 263 102 466 124 734
016 110.9 2Z 038 229.1 9Z 059 116 081 265 103 503 125 743
017 114.8 2A 039 233.6 M5 060 125 082 271 104 506 126 754
018 118.8 2B 040 241.8 M6 061 131 083 306 105 516
019 123.0 3Z 041 250.3 M7 062 132 084 311 106 532
020 127.3 3A 042 254.1 OZ 063 134 085 315 107 546
021 131.8 3B 064 143 086 331 108 565