December 15, 2009
G30 Developer’s Kit
v
Preface
Manual Scope
The G30 Developer’s Kit is designed to support the hardware and software development and
validation of the G30/G30 Adapter Quad Band GSM module.
This is done by routing the G30 81 pins to the “24” family 70 pin connector interface, to provide
quick interface with the “24” family Evaluation Board.
This manual describes the use of G30 Adapter Board or the G30 itself (70 pin interface connector
model) with the G30 Developer's Kit, and describes the technical details required by the user to
successfully integrate the Motorola G30 cellular engine into an original equipment manufacturer
(OEM) wireless host device. With the help of this manual, the user can utilize the Developer's Kit
to conduct a full series of test and evaluation procedures on the G30, as well as perform
application development.
Target Audience
This manual is intended for all members of the integration team who are responsible for
integrating the G30 into the host application, including representatives from hardware, software
and RF engineering disciplines.
Manual Organization
This manual contains the following chapters:
•
Chapter 1
— introduces the G30 Developer’s Kit
•
Chapter 2
— describes the Developer Board and its components in detail, including
connectors, jumpers, switches and LED indicators. It also includes a set of setup procedures
for first-time use
•
Chapter 3
— provides contact information for Motorola Service Support and Customer
Assistance
Applicable Documents
•
G30 Module Hardware Description: 6802986C55-A
•
G30 AT Commands: 6802986C33-A
