3 - 6
FX Series RFID Readers Integrator Guide
Communications Connections
Use a standard Ethernet connection or a POE Ethernet connection to connect the FX Series reader to a host or
network.
Ethernet Connection
The reader communicates with the host using an Ethernet connection (10/100Base-T Ethernet cable). This
connection allows access to the
Administrator Console
, used to change reader settings and control the reader.
With a wired Ethernet connection (10/100Base-T cable), power the FX Series reader using either the reader
Motorola AC power supply, or by Power-Over-Ethernet through the Ethernet cable.
Ethernet: Power through AC Outlet
The FX Series reader communicates to the host through a 10/100Base-T Ethernet cable and receives power
through a Motorola AC power supply.
1.
Route the Ethernet cable.
2.
Route the power cable.
3.
Terminate the Ethernet cable according to
4.
Connect the Ethernet cable to the LAN port on the FX Series reader. See
5.
Connect the other end of the Ethernet cable to the host system LAN port.
6.
Connect the Motorola AC power supply to a wall outlet.
7.
Insert the power supply barrel connector into the FX Series reader power port. See
.
8.
Verify that the unit booted properly and is operational. See
Verifying Hardware Functionality on page 3-5
.
9.
On a networked computer, open an internet browser and connect to the reader. See
10.
Log in to the
Administrator Console
.
See
Administrator Console Login on page 4-8
.
Ethernet: Power through POE
The POE installation option allows the FX Series reader to communicate and receive power on the same
10/100Base-T Ethernet cable. See
.
1.
Terminate the Ethernet cable according to
2.
Connect the Ethernet cable to the FX Series reader Ethernet / Bias-T port. See
3.
Connect the other end of the Ethernet cable to the Bias-T (POE) module.
4.
Connect a patch cable from the Bias-T (POE) module to the host system LAN port.
5.
Verify that the unit booted properly and is operational. See
Verifying Hardware Functionality on page 3-5
.
CAUTION
Do not use POE in conjunction with an external power supply connected to the power port on the FX
Series reader.
CAUTION
Do not connect to PoE networks outside the building.
Summary of Contents for FX7400 Series
