Motorola ex560 xls User Manual Download Page 51

Page: 51 / 68

English

UDIO/T

SETTINGS

AUDIO/TONE SETTINGS

You can customize the audio and tone feature
settings on your radio by

)

to enter menu mode.

until

)

to select

Audio/Tones

until you see the feature you

want to change (see the table on the next
page).

)

to select the feature. You see the

feature’s current setting.

for available settings. (For

Name and Call Tone Tagging, see page 32.)

)

to set the desired setting.

Audio/Tone Settings

Feature

What it Does

Settings

Alert Vol Lvl

Makes the volume level of the audio and alert tones
independent. If turned on, it makes the alert tones follow
the settings in the CPS; if turned off, the alert tones follow
the setting of the volume knob.

Ind Alert Off
Ind Alert On

Tone Disable

Turns all alert and audio tones on or off.

Tones On
Tones Off

EX560XLS.book Page 49 Thursday, September 27, 2007 3:28 PM

Summary of Contents for ex560 xls





































































Search results

Summary of Contents for ex560 xls

Reviews:

Related manuals for ex560 xls

Brands by name

Popular brands

Motorola ex560 xls, User Manual

Search results

Summary of Contents for ex560 xls

Reviews:

Related manuals for ex560 xls

Brands by name

Popular brands