Motorola ex560 xls, User Manual

Page: 39 / 68

37
English
SCAN
DELETING A NUISANCE CHANNEL/
TALKGROUP
(SYSTEM SCAN OPERATION ONLY)
If a talkgroup or channel continually generates
unwanted calls (a “nuisance” channel), use the
preprogrammed
System Scan button to
temporarily delete the talkgroup or channel
from the Scan list.
To temporarily delete the channel/
talkgroup:
Restoring a Channel/Talkgroup Back to the
Scan List
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
EDITING A SCAN LIST
(
SYSTEM SCAN OPERATION ONLY
)
One Scan list is assigned to each of the 16
positions on the
Zone/Channel Selector knob.
Each Scan list can contain up to 16 talkgroups
and/or channels. The same talkgroup or
channel can be included in several Scan lists,
and the same Scan list can be assigned to
several
Zone/Channel Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.
Your radio cannot receive any calls while you
are editing a Scan list. The
K
symbol is
displayed while you are in edit mode.
Note: In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
1 While the radio’s receiving activity is on the
nuisance channel, press and hold the
preprogrammed Scan button until you hear a
high-pitched tone (valid key press).
2 Release the Scan button. The nuisance
channel has been temporarily deleted from
your Scan list.
EX560XLS.book Page 37 Thursday, September 27, 2007 3:28 PM