Motorola ES400 Page 138 User Manual Download

Page: 138 / 212

11 - 18 ES400 User Guide

Card Setup

The cards on the Motorola Home screen can be configured and re-ordered.

On any card, tap

to flip the card over.

Figure 11-15

Back of Card

Re-Order Cards

Each icon on the card back represents a card. To re-order the cards, press and hold an icon and then drag it to a
new location. Tap

to return to the front of the card.

Configure Cards

Cards can be removed so that they do not appear on the Home screen.

On any card, tap

to flip the card over.

Tap

to configure the cards.

Figure 11-16

Card Configuration Window

The window lists the available cards. A

next to the name indicates that the card is enabled. A

indicates that

the card is disabled.

Tap the name of the card to enable or disable the card.

Summary of Contents for ES400





















































































































































































































Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands

Motorola ES400, User Manual

Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands