28
October 4, 2004
6809490A73
Disassembly
E1000
3.
Turn the transceiver board over and using the disassembly tool, disengage the
joystick flex connector and lift it off of the transceiver board.
To replace the joystick assembly
1.
Align the joystick flex connector with the connector on the transceiver board
and press it into place
1.
Align the joystick assembly with the transceiver board and press it into place.
2.
Follow the procedures to replace the:
•
rear housing
•
front housing
•
SIM card
•
battery
•
battery door
Figure 12. Removing the Joystick Assembly
Latch
Latch
Flex
Connector
Disassembly
Tool
Joystick Assembly