Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 149 / 517

Chapter
5
Interconnection and Internal Cabling
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
■
■
This chapter covers the following topics:
•
"AC/DC Power Cabling"
•
"User Alarms/Controls, X.21, RGPS, and GPS Cabling"
•
"E1 and Ethernet Cabling"
•
"RF Cabling"
•
"CAN Bus Cabling"
AC/DC Power Cabling
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
AC power cabling refers to the connection between the Junction Panel and the Power Supply Unit.
DC power cabling refers to the power connections between the Junction Panel and the Power Supply
Unit and between the Power Supply Unit and other modules within the cabinet.
Table 5-1 and Table 5-2 identify and Figure 5-1 and Figure 5-2 show the AC/DC power connections.
Table 5-1 AC/DC Power Cabling for MTS 2
Index
Cable Part
Number
From Unit/
Connection Name
To Unit/ Connection
Name
Notes
1 3066550B01 Junction Panel/ DC
Power Supply Unit/ DC In
Battery
N/A
2 3066556B01
Junction Panel/
Bat Temp. Power Supply Unit/
Battery Temp. Sens.
N/A
3 3066552B01 Junction Panel/ AC In Power Supply Unit/ AC In With retaining clip
4a Base Radio 1/ DC In
Pins: 1, 2, 3, 8, 10, and
11
4b Base Radio 2/ DC In
Pins: 4, 5, 6, 9, 12, and
13
4c
3066545B01 Junction Panel/ AC In 2
Site Controller/ Power Pins: 7 and 14
6802800U74-N September 2009
5-1