Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 155 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual User Alarms/Controls, X.21, RGPS, and GPS Cabling
User Alarms/Controls, X.21, RGPS, and GPS Cabling
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
X.21 cabling refers to the cabling between the Site Controller and the X.21 connector on the Junction Panel.
Either X.21 or E1 cabling is used, depending on which option is ordered.
User Alarms/Controls cabling refer to the cabling between the Site Controller and
the connector on the Junction Panel.
RGPS and GPS cabling refer to the cabling between the Site Controller and the connectors on the Junction Panel.
Table 5-4 and Table 5-5 identify and Figure 5-4 and Figure 5-5 show the User Alarms/Controls,
X.21, RGPS, and GPS cabling.
X.21 and RGPS cabling depends on ordered con
fi
guration.
Table 5-4 User Alarms/Controls, X.21, RGPS, and GPS Cabling for MTS 2
Index
Cable Part
Number
From Unit/
Connection Name
To Unit/
Connection
Name
Notes
MTS 2 with RGPS and E1 or RGPS and X.21
2a Junction Panel/ X.21 15 pin D male connector type
2b
3066546B01
Junction Panel/ RGPS
Site Controller/
X.21/Remote GPS
15 pin D female connector type
3a
Junction Panel/ User
Alarms/Controls 25 pin D female connector type
3b
3066549B01
Door Alarm
Site Controller/
Alarm/Controls
Molex connector type
MTS 2 with Internal GPS and X.21
1 3066543B07 Junction Panel/ GPS Site Controller/ GPS Coax cable
2a 3066546B02 Junction Panel/ X.21 Site Controller/
X.21/Remote GPS N/A
3a Junction Panel/ User
Alarms/Controls 25 pin D female connector type
3b
3066549B01
Door Alarm
Site Controller/
Alarm/Controls
Molex connector type
MTS 2 with Internal GPS and E1
1 3066543B07 Junction Panel/ GPS Site Controller/ GPS Coax cable
6802800U74-N September 2009
5-7