8 2 O p e r a t i o n
D C P 5 0 1 U s e r G u i d e
B A S S :
-
5 d B
T R E B L E :
+ 1 0 d B
U s i n g t h e D C P 5 0 1 D i g i t a l A u d i o / V i d e o R e c e i v e r
This section describes:
How to change the tone setting
How to change balance and fade on the DCP501
Changing the DCP501 To ne Setting
Use this feature to define the bass and treble response. The factory setting is
0 d B
. The range
is from –10dB to +10dB. To set the tone:
1
Press
TONE
/
LEVEL
to display
B A S S
.
2
Press
SELECT
or
OK
and the current setting flashes.
3
Press
CURSOR
left/right
(
<<<<
>>>>
) to set the speaker bass response and press
SELECT
.
4
Press
TONE
/
LEVEL
twice to display
T R E B L E
. Press
SELECT
and the current setting flashes.
5
Press
CURSOR
left/right (
<<<<
>>>>
) to set the speaker treble response and then press
SELECT
or
OK
.
Below are examples of what is displayed on your TV when you adjust the bass and treble
response on your DCP501.
O n -screen D i spl ay
D C P 501 D i spl ay
Changing Balance and Fade on the DCP501
You can define the balance between left and right speakers, and between front and rear
speakers with the balance and fade settings. Balance and fade settings should only be used to
perform minor adjustments to the sound playback once the Speaker Test Tone Adjust has been
conducted. This must be performed while sitting at the listening position. Balance/fade
adjustments can reduce the maximum volume of the DCP501.
Balance and fade on the DCP501 are adjusted by attenuating the opposite set of channels. For
example, if you want the balance all the way to the right, the DCP501 and the on-screen display
show
B A L A N C E : L - 2 0
. Balance all the way to the left reads
B A L A N C E : R - 2 0
. The factory
setting is
0 dB
. The range for balance/fade is adjustable by up to
20 dB
. To change the
balance/fade settings on the DCP501:
1
Press
TONE
/
LEVEL
three times to display
B A L A N C E
.
2
Press
SELECT
and the current setting flashes.
3
Press
CURSOR
left/right (
<<<<
>>>>
) to set the balance between the left and right speakers and press
SELECT
.
4
Press
TONE
/
LEVEL
four times to display
F A D E R
on your TV or
F A D E
on the DCP501
display.
5
Press
SELECT
and the current setting flashes.
B A S S - 5
T
R
B
L
+
1
0
