5 4 O p e r a t i o n
D C P 5 0 1 U s e r G u i d e
*
L E F T /
R I
G H T
S E T U P
*
L E F T /
R I
G H T :
L A R G E
D I
S T A N C E
:
1 0 f
t
R E T U R N
T O
M E N U
*
L E F T /
R I
G H T
S E T U P
*
L E F T /
R I
G H T :
S M A L L
D I
S T A N C E
:
1 0 f
t
R E T U R N
T O
M E N U
20
Press
SELECT
or
OK
and the currently selected setting flashes. In this example,
L A R G E
flashes. The
L A R G E
and
S M A L L
settings determine which speakers receive low frequency
(bass) information. Use the
L A R G E
setting for a speaker that is a traditional full-range
speaker capable of reproducing sounds below 100Hz. Use the
S M A L L
setting for smaller,
frequency-limited satellite speakers that do not reproduce sounds below 100Hz. When the
S M A L L
setting is used, a subwoofer is required to reproduce low frequency sounds. Note
that
L A R G E
and
S M A L L
refer to the speaker’s ability to reproduce low frequency sounds
and not their physical size. Consult the manufacturer’s manual that accompanied your
speakers for more information.
O n -screen D i spl ay
D C P 501 D i spl ay
21
Press
CURSOR
left/right (
<<<<
>>>>
) to display
L A R G E
or
S M A L L
.
The speaker icon on DCP501 display changes with the
L A R G E
/
S M A L L
setting.
The settings for
L E F T / R I G H T S E T UP
are affected by your setting on the
S U B W O O F E R S E T U P
menu
22
Press
SELECT
or
OK
to accept your selection and
L A R G E
or
S M A L L
stops flashing.
23
Press down arrow (
∨
).
O n -screen D i spl ay
D C P 501 D i spl ay
L A R G E
D I S T A N C E
