16
Call Waiting
EN
Delete an entry
1.
Press
Menu
, scroll
d
to
Calls Lists
then press
Select
.
Missed
Calls
is highlighted.
If required, scroll
u
or
d
to
Received
or
Dialled Calls
then press
Select
.
2.
Scroll
u
or
d
to the entry you want and press
Options
.
3.
Scroll
d
to
Delete Call
. Press
Select
.
4.
Press
Back
to return to the previous menu level or
>
to
return to standby.
Delete all entries
You can delete all entries in an individual Calls list or all entries
from all Calls lists.
1.
Press
Menu
, scroll
d
to
Calls List
then press
Select
.
Missed Calls
is highlighted.
If required, scroll
u
or
d
to
Delete Calls
press
Select
.
2.
Scroll
u
or
d
to highlight
Missed Calls
,
Received Calls
,
Dialled
Calls
or
All Calls
. Press
Select
.
3.
Press
Yes
to confirm or
No
to cancel.
4.
Press
Back
to return to the previous menu level or
>
to
return to standby.
9. Call Waiting
You must subscribe to your network’s Caller Display service for
Call Waiting to work. A quarterly fee may be payable.
1.
During a call, you hear a soft beep in the earpiece and the
display shows the number of the caller or the name if it
matches an entry in your phonebook. If these are not
available, the display shows
Call Waiting
.
2.
Press
R
to put your current caller on hold and speak to
the new caller.
3.
Press
R
again to switch between both callers (In some
countries, it is required to dial R + 2).
4.
Press
>
to finish the current call or
>
to end both calls.
10. Voicemail
If you have subscribed to your network operator’s voicemail
messaging service, your handset can inform you when you
receive new voicemail.
If you have new voicemail,
You have new voicemail
is displayed.
• Press
Listen
to dial the voicemail number preset on the
handset. If your voicemail number is different to the number
stored in the handset, you can manually dial your preferred
voicemail number.
• Or press
Back
to listen to your voicemail at a later time. A
reminder icon
will be displayed.
11. Room Monitor
You can use your D1110 handset to monitor the sounds in
another room. If the sounds reach a certain level the handset
will automatically dial out to a preset external number or to
another handset. When the Room Monitor is set to
On
, the
handset will display
Room Monitor On
and only the microphone will
be active to monitor the sound levels in the room. Both the
speaker and receiver will be set to
Off
and the handset will not
ring if there’s any incoming call.
To switch Room Monitor On
1.
Press
Menu
, scroll
d
to
Extra
then press
Select
.
Room Monitor
is
highlighted. Press
Select
.
Mode
will be highlighted.
2.
Press
Select
, scroll
d
to
On
then press
Select
.
Set to ON
is
displayed for 2 seconds. The handset returns to idle screen
and disply as
Room Monitor On
.
To switch off
Room Monitor
press
Off
.
To change the monitor level
The monitor level can be set to High or Low, the default setting
is "Low".
To increase the sensitivity of the Room Monitor:
1.
Press
Menu
, scroll
d
to
Level
, press
Select
and scroll
u
or
d
to
select
Low
or
High
setting.
To set the dial out number
1.
Press
Menu
, scroll
d
to
Call to
and press
Select
.
2.
Use the
u
or
d
key to select
External
or
Internal
.
External
1.
Press
Select
and
Enter Number:
prompt will be displayed.
2.
Enter the number and press
Save
.
Saved
will be displayed.
When
Room Monitor
is switched on and the sound level
reaches a certain level the number will be automatically
dialled.
Internal
1.
Press
Select
and the registered handset will be listed, for
example "Handset 2".
2.
Scroll
u
or
d
to select the handset the
Room Monitor
will call
if the noise levels reach a certain level.
3.
Press
Select
and
Set to handset 2
is displayed.
