Motorola CPEo 450 Series, User Manual

Page: 29 / 54

5 Advanced Configuration
Table 5-1 Port Forwarding Menu
Field or Button Description
Enable UPnP IGD Enables the Universal Plug and Play
(UPnP) Internet Gateway Device (IGD)
profile to allow certain Windows
applications to set up the port
forwarding rule dynamically when NAT
is enabled on this device.
DMZ (DeMilitarized Zone) IP Address Enter the DMZ IP Address.
Click the Apply button once you have made changes.
Forwarding Tab
Click the ADD button to create additional Port Forwarding rules. The Forwarding
tab contains the following selections:
Table 5-2 Forwarding Tab
Field or Button Description
Select Select a box when you want to delete
the specific row.
Protocol Select TCP (Transmission Control
Protocol) or UDP (User Datagram
Protocol).
WAN Port Start Enter the beginning port range for
external network access.
WAN Port End Enter the ending port range for
external network access.
LAN IP Address Enter the IP address to host the
service.
LAN Port Start Enter the beginning port range for
internal network access.
LAN Port End Enter the ending port range for
internal network access.
Enabled Check to enable specific port
forwarding.
Click the Apply button once you have made changes.
5-2 68P09306A78-A
FEB 2010