Motorola CPCI-9120, Reference Manual

Page: 148 / 168

Diagnostics Introduction
IXP/CPCI-9120 147
Note: A specific command is optional. You can enter
h
to get help on all diagnostic
commands.
Example:
For help on the fill command, type
h fill
The results one can expect from a working board are given below:
CPCI920_DIAG> h fill
fill: <low> <high> <val> (fill mem)
Arguments: <Hex><Hex><Hex>
banner
D
ESCRIPTION
Prints a banner containing basic hardware and software information.
S
YNTAX
Banner
Example:
Banner
exit/reset
D
ESCRIPTION
reset command
S
YNTAX
Exit
Reset
Example:
Exit
Reset
tf
D
ESCRIPTION
Enables test flags. Causes given device to be included or excluded from tests in the
test all
command.
S
YNTAX
tf <test_type_ID> <status>
P
ARAMETERS
test_type_id
test identifier. Can be any of the following:
– 0 - SRAM
– 1 - SDRAM
– 2 - UENG
– 3 - TIMERS
– 4 - PCI