background image

COMPUTER SOF

T

WARE 

COPYRIGHT

S

                                                                                                                                                           iii

COMPUTER SOFTWARE 

COPYRIGHTS

The Motorola products described in this 
manual may include copyrighted Motorola 
computer programs stored in semiconductor 
memories or other media. Laws in the United 
States and other countries preserve for 
Motorola certain exclusive rights for 
copyrighted computer programs, including, but 
not limited to, the exclusive right to copy or 
reproduce in any form the copyrighted 
computer program. Accordingly, any 
copyrighted Motorola computer programs 
contained in the Motorola products described in 
this manual may not be copied, reproduced, 
modified, reverse-engineered, or distributed in 
any manner without the express written 
permission of Motorola. 

Furthermore, the purchase of Motorola 
products shall not be deemed to grant either 
directly or by implication, estoppels, or 
otherwise, any license under the copyrights, 
patents or patent applications of Motorola, 
except for the normal non-exclusive license to 
use that arises by operation of law in the sale of 
a product.

Summary of Contents for CLP1010

























































Reviews: