background image

CONTENTS

                                                                                                                                                           i

Computer Software Copyrights . . . . . . . . . iii

Radio Frequency (RF) Exposure Safety 
Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Product Safety and RF Exposure 
Compliance   . . . . . . . . . . . . . . . . . . . . . .  iv

FCC Licensing Information  . . . . . . . . . . . . .v

Interference Information  . . . . . . . . . . . . . . . . .v

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .1

Radio Overview . . . . . . . . . . . . . . . . . . . . . . .2

Radio Controls. . . . . . . . . . . . . . . . . . . . . . . . .2
Getting Started  . . . . . . . . . . . . . . . . . . . . . . . .3
Install The Battery . . . . . . . . . . . . . . . . . . . . . .3

Connecting a Wired Audio Accessory. . . .4

Connecting a Bluetooth Wireless 
Accessory (Select Models Only) . . . . . . . . . . .5

Add Bluetooth Headset (Initial Pairing) . . .5
Reconnect to Last Connected Bluetooth 
Headset. . . . . . . . . . . . . . . . . . . . . . . . . . .5
Erase Bluetooth Headset History and Add 
Bluetooth Headset  . . . . . . . . . . . . . . . . . .5

Turning the Radio On and Off . . . . . . . . . 6
Adjusting the Volume. . . . . . . . . . . . . . . . 6
Installing and Removing the Swivel 
Belt Clip Holster . . . . . . . . . . . . . . . . . . . . 6

Transmitting and Receiving . . . . . . . . . . . . . . 7
Operation with Menu Settings  . . . . . . . . . . . . 8

Selecting a Channel. . . . . . . . . . . . . . . . . 9
Monitoring a Channel. . . . . . . . . . . . . . . 10
Scanning . . . . . . . . . . . . . . . . . . . . . . . . 10
Dynamic Talkaround Scan (*) . . . . . . . . 11
Sending Call Tone (enabled through 
CPS)  . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mute Feature (*). . . . . . . . . . . . . . . . . . . 11
Talk Permit Tone (*). . . . . . . . . . . . . . . . 11

Battery and Charger Features. . . . . . . . . . 12

Battery Features. . . . . . . . . . . . . . . . . . . . . . 12

About the Li-Ion Battery . . . . . . . . . . . . . 12
Battery Recycling and Disposal . . . . . . . 13
Removing the Lithium-Ion (Li-Ion) 
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power Supply, Adapter and Drop-in Tray 
Charger . . . . . . . . . . . . . . . . . . . . . . . . . 14

Summary of Contents for CLP1010

























































Reviews: