Motorola CDM1250, Service & Installation Manual

Page: 11 / 32

October, 2004 6880309N15-A
1-3
CDM Control Station Introduction to the CDM Control Station
Preventive Maintenance
Preventive Maintenance
Preventative maintenance of the Control Station consists of
visual inspections and periodic cleaning.
Visual Inspection
Check that external surfaces of the equipment are clean, that
connecting cables are not damaged, and that connections are
firm. A detailed inspection of the interior electronic circuitry
is not needed or desired.
Periodic Cleaning
Periodically clean smudges and grime from the exterior
housing. Use a soft, non-abrasive cloth moistened in a mild
soap and water solution. Rinse the surface using a second
cloth moistened in clean water, and clean any dirt or debris
from the fan grill.
type-N male connector 2884476G01
type-N 1/2” hardline male TDN6677
type-N 1/2” hardline female TDN6678
RG58A/U coaxial cable 3000475378
RG400/U coaxial cable 3084173E01
RG214/U coaxial cable 3015068A17
1/2” hardline cable 3080329A22
8 ft. jumper cable TDN8406A*
type-N f-f adapter 5882764A01*
*Use of the type-N f-f adapter may be required to connect the jumper cable
to the main feedline.
Table 1-2. Part Numbers for
Connectors/Cables (Cont.)
Part Motorola Part Number