46
Help
13.
Help
No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is
connected properly.
• Check that the mains power is connected properly and switched on.
No display on the corded base
• Check that the mains power is connected properly and switched on.
• Reset the base by disconnecting the mains power.
• Leave for a few seconds and reconnect.
No display on the cordless handset
• Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
• Check that the handset is switched on. Press and hold
n
.
• Reset the base by removing the batteries and disconnecting the mains power. Wait for
around 15 seconds before connecting it again. Allow up to one minute for the handset
and base to synchronize.
icon flashes
• Handset is out of range. Move closer to the base.
• Make sure that the handset is registered to the base, see page 41.
• Check that the mains power is connected properly and switched on.
Keypad does not seem to work
• Check that the keypad lock is not on, see page 34.
icon is not flashing during charge
• Adjust the handset slightly on the base.
• Clean the charging contacts with a cloth moistened with alcohol.
• Check that the mains power is connected properly and switched on.
• The battery is full. When the handset is fully charged,
will appear steady on the
display.
No Caller ID
• Check your subscription with your network operator, see pages 29 and 44.
• The caller may have withheld their number.
• The record cannot be found in your phonebook. Check that you have the correct
name / number stored in your phonebook, with the full area code.
I have forgotten my PIN!
• Restore your C42 to its default settings, see, page 43.
Cannot register a handset to the base
• You can register up to a maximum of 4 handsets to a C42 base. You must de-register a
handset in order to register a new one, see page 42
