14
Getting to know your phone
13 BLUETOOTH KEYS
In Idle, to pair up Bluetooth cellular: Press any one for 2s to
initiate cellular pairing mode, the 7-seg LED will display and
flash "C x" to initiate cellular pairing mode. X can be 1 or 2
and it depends on which key user pressed.
In idle, to pair up Bluetooth headset: Press and hold for more
than 5 sec, the 7-seg LED will display and flash "H" to initiate
headset pairing mode.
14 FIND
Press to find/page all registered handsets.
Message counter display
2-digit 7-seg
LED display
Behavior
0
No messages.
0
(flashing)
The clock needs to be set.
1-99
Total number of old messages and memos,
or message number currently playing.
1-99
(flashing)
Total number of messages and memos. The
number flashes when there are new messages.
After a power failure, the number in the
message counter will flash to indicate the
clock needs to be set.
10-99
Current remote access code while setting.
1-99
(counting)
Elapsed time while recording a memo or
announcement up to 90 seconds.
99
(flashing)
A memo recording is longer than 99
seconds.
1-99
&
F
(alternating)
Memory is full. Messages must be deleted
before new message can be recorded.
--
The system is answering a call, being
accessed remotely, or the clock is being set.
--
(flashing)
The system is being setup, initialized or
messages are being deleted.
1-8
Displayed for 2 seconds while adjusting the
volume of base speaker.
