Motorola AT&T NVG589 Administrator'S Hanbook Download Page 86

Page: 86 / 216

Administrator’s Handbook

Link: Resets

When you click

Resets

, the

Resets

page appears.

In some cases, you may need to clear all the configuration settings and start over again to program the Motorola

Gateway. You can perform a factory reset to do this.

It might also be useful to reset your connection to the Internet without deleting all of your configuration settings.

◆

Click the

Reset IP

to refresh your Internet WAN IP address. LAN-side users will be briefly disconnected from

the Internet, but will otherwise be unaffected.

◆

Click the

Reset Connection

button to disconnect and reconnect all of your connections, including your VoIP

phones.

◆

Click the

Reset Device

button to reset the Gateway back to its original factory default settings.

◆

Click the

Restart

button to reboott the device. Previous configuration settings are still retained.

☛

NOTE:

Exercise caution before performing a Factory Reset. This will erase any configuration changes that
you may have made and allow you to reprogram your Gateway.

Summary of Contents for AT&T NVG589

























































































































































































































Search results

Summary of Contents for AT&T NVG589

Reviews:

Related manuals for AT&T NVG589

Brands by name

Popular brands

Motorola AT&T NVG589, Administrator'S Hanbook

Search results

Summary of Contents for AT&T NVG589

Reviews:

Related manuals for AT&T NVG589

Brands by name

Popular brands