manualshive.com logo in svg

Motorola AT&T NVG589, Administrator'S Hanbook, Page: 109 / 216

Share
Download
Motorola AT&T NVG589 Administrator'S Hanbook Download Page 109

109

SHELL Commands

Common Commands

arp 

nnn.nnn.nnn.nnn

Sends an Address Resolution Protocol (ARP) request to match the 

nnn.nnn.nnn.nnn 

IP address to an 

Ethernet hardware address.

clear [ yes ]

Clears the configuration settings in a Motorola Gateway. You are prompted to confirm the clear command by 
entering 

yes

.

clear_certificate

Removes an SSL certificate that has been installed.

configure

Puts the command line interface into Configure mode, which lets you configure your Motorola Gateway with Con-
fig commands. Config commands are described starting on

 

page 121

. 

download [ 

server_address 

] [ 

filename

 ] [ confirm ]

This command installs a file of configuration parameters into the Motorola Gateway from a TFTP (Trivial File 
Transfer Protocol) server. The TFTP server must be accessible on your Ethernet network.

You can include one or more of the following arguments with the download command. If you omit arguments, the 
console prompts you for this information.

◆

The 

server_address

 argument identifies the IP address of the TFTP server from which you want to copy 

the Motorola Gateway configuration file. 

◆

The 

filename

 argument identifies the path and name of the configuration file on the TFTP server. 

◆

If you include the optional 

confirm

 keyword, the download begins as soon as all information is entered.

You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms that support 
SSL, as follows:

download [-cert] [server_address ] [filename] [confirm]

install [ 

server_address 

] [ 

filename

 

] [ confirm ]

Downloads a new version of the Motorola Gateway operating software from a TFTP (Trivial File Transfer Protocol) 
server, validates the software image, and programs the image into the Motorola Gateway memory. After you install 
new operating software, you must restart the Motorola Gateway.

The 

server_address

 argument identifies the IP address of the TFTP server on which your Motorola Gateway 

operating software is stored. The 

filename

 argument identifies the path and name of the operating software file 

on the TFTP server.

If you include the optional keyword 

confirm

, you will not be prompted to confirm whether or not you want to per-

form the operation.

Summary of Contents for AT&T NVG589

























































































































































































































Reviews:

No comments