manualshive.com logo in svg

Motorola AT&T NVG589, Administrator'S Hanbook, Page: 164 / 216

Share
Download
Motorola AT&T NVG589 Administrator'S Hanbook Download Page 164

Administrator’s Handbook

164

set voip advanced-telephony-setting codec 

codec

 

       jitter-transit-delay-threshold 

value

set voip advanced-telephony-setting fxs-port-setting-for-fxo 
       [ none | fxs1 | fxs2 | both | emgncy ]

Sets a port to be used for the FXS (Foreign eXchange Subscriber interface) port to the FXO (Foreign eXchange 
Office interface -- the phone) port. Default is 

none

,

set voip advanced-telephony-setting rtp-port-range-start 

value

set voip advanced-telephony-setting rtp-port-range-end 

value

Sets the start and end port values for the RTP port range. Although no ports are specified for the RTP protocol, the 
RTP data is to be carried on an even UDP port number. The defaults in use for the Motorola Gateway are 

8024

 

and 

8036

, respectively.

set voip advanced-telephony-setting rtcp-option [ off | on ]

Turns Real-Time Transport Control Protocol on or off. RTCP supports and controls RTP media streams, but does 
not itself deliver media streams. Default is 

off

.

set voip advanced-telephony-setting t38-option [ off | on ]

Turns T.38 fax capability on or off. Default is 

off

.

set voip advanced-telephony-setting sip-session-timer-value 

seconds

Sets a timer in seconds for SIP sessions to periodically verify that an established session is still active. Default is 

2280

.

set voip advanced-telephony-setting sip-t1-timer-value 

milliseconds

Sets a SIP T1 timer value, an estimate of the round trip time, in milliseconds from 100 – 5000. Default is 

500

.

set voip advanced-telephony-setting sip-dynamic-line-selection [ off | on ]

Turns dynamic (next available) line selection off or on. Default is 

off

.

set voip RegionSpecificSettings Region-Code 

region_code

Specifies the set of standards in use for the geographical region. Example: "USA_DEFAULT".

set voip RegionSpecificSettings fxs-hook-flash-min-time 

seconds

Specifies the minimum Foreign Exchange Station ( FXS) hookflash time in seconds. Default is 

280

.

set voip RegionSpecificSettings fxs-hook-flash-max-time 

seconds

Specifies the maximum Foreign Exchange Station ( FXS) hookflash time in seconds. Default is 

1100

.

set voip RegionSpecificSettings fxs-debounce-onoff-hook-delay 

seconds

Specifies the on/off-hook debounce time delay for removing the ripple signal, in seconds. Default is 

100

.

Summary of Contents for AT&T NVG589

























































































































































































































Reviews:

No comments