manualshive.com logo in svg

Motorola ASTRO APX 1000 Series, User Manual, Page: 68 / 94

Share
Download
Motorola ASTRO APX 1000 Series User Manual Download Page 68

• To toggle the backlight on or off, press the

preprogrammed 

Light/Flip

 button.

• To turn the backlight on, press either the 

Menu

Select

 buttons or any programmable radio

controls or buttons.

Locking and Unlocking the Controls

You can lock your radio programmable buttons and
MFK to avoid inadvertent entry. Check with your
dealer or qualified technician for best selection to suit
your usage.

1

Toggle the preprogrammed 

Keypad/Control Lock

button to on.
The display shows 

Kypd/Ctrl Lock

.

2

Toggle again to unlock the controls.

Turning the Controls and Buttons Tones On or Off

You can enable and disable the tones of Navigation
buttons and controls if needed.

•

Turning the tones on or off via the preprogrammed

Mute

 button:

a) To turn the tones off or on, press the

preprogrammed 

Mute

 button.

•

Turning the tones on or off via the radio menu:
a) Press the 

Menu Select

 button directly below

Mute

.

The display shows momentary 

Tones off

,

indicating that the tones are disabled or the
display shows momentary 

Tones on

, and you

hear a short tone indicating that the tones are
enabled.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if
needed.

•

Turning Voice Mute off or on via the
preprogrammed 

Voice Mute

 button:

a) To turn the feature off or on, press the

preprogrammed 

Voice Mute

 button.

•

Turning Voice Mute on or off via the radio menu:
a) Press the 

Menu Select

 button directly below

VMut

.

The display shows momentary 

Voice mute off

, and

you hear a short tone, indicating that the feature is
disabled or the display shows momentary 

Voice

Advanced Features

64

English

Summary of Contents for ASTRO APX 1000 Series































































































Reviews:

No comments