Motorola ASTRO APX 1000 Series User Manual Download Page 31

Page: 31 / 94

Site Display/
Search (Trunking
Only)

Displays the current site ID and
RSSI value; performs site
search for Automatic Multiple
Site Select (AMSS) or
SmartZone operation.

Site Lock/Unlock
(Trunking Only)

Locks onto a specific site.

Talkaround/Direct
(Conventional
Only)

Toggles between using a
repeater and communicating
directly with another radio.

Assignable Settings or Utility Functions

Keypad/Controls
Lock

Locks or unlocks the keypad,
programmable buttons,
switches or rotary knobs.

Light/Flip

Press the button to toggle the
display backlight on or off;
press and hold the button to
reverse the content of the top
display.

Voice
Announcement

Audibly indicates the current
feature mode, Zone or
Channel the user has just
assigned.

Voice Mute

Toggles voice mute on or off.

Volume Set Tone

Sets the volume set tone.

Accessing the Preprogrammed Functions

You can access various radio functions through one
of the following methods.

•

A short or long press of the relevant
programmable buttons.

•

Use the

Menu Select

buttons below the softkeys.

Softkeys

Menu Select Buttons

Identifying Radio Controls

English

Summary of Contents for ASTRO APX 1000 Series































































































Search results

Summary of Contents for ASTRO APX 1000 Series

Reviews:

Motorola ASTRO APX 1000 Series, User Manual, Page: 31 / 94

Search results

Summary of Contents for ASTRO APX 1000 Series

Reviews: