manualshive.com logo in svg

Motorola ASTRO APX 1000 Series, User Manual, Page: 34 / 94

Share
Download
Motorola ASTRO APX 1000 Series User Manual Download Page 34

Identifying Status Indicators

Status Icons

The 160 x 90 pixel front liquid crystal display (LCD) of
your radio shows radio status, text entries, and menu
entries. The top two display rows contain color icons
that indicate radio operating conditions.

Receiving

Radio is receiving a call or data.

Transmitting

Radio is transmitting a call or data.

Battery

For IMPRES

™

 battery operation only –

the icon shown indicates the charge re-
maining in the battery.

For all battery operation – the icon blinks
when the battery is low.

Received Signal Strength Indicator
(RSSI)

The number of bars displayed repre-
sents the received signal strength for the
current site, for trunking only. The more
stripes in the icon, the stronger the sig-
nal.

Roaming

The radio has roamed to and is currently
registered to a foreign system.

Direct

On

 – Radio is currently configured for di-

rect radio-to-radio communication (dur-
ing conventional operation only).

Off

 – Radio is connected with other ra-

dios through a repeater.

Monitor (Carrier Squelch)

Selected channel is being monitored
(during conventional operation only).

Identifying Status Indicators

30

English

Summary of Contents for ASTRO APX 1000 Series































































































Reviews:

No comments