manualshive.com logo in svg

Motorola ASTRO APX 1000 Series, User Manual, Page: 53 / 94

Share
Download
Motorola ASTRO APX 1000 Series User Manual Download Page 53

• Stop and restart a scan.
• Mode change to another channel and back to

the original channel.

• Turn off the radio and then turn it on again.

Nuisance mode delete can be disabled by the
system administrator.

Call Alert Paging

This feature allows your radio to work like a pager.

The radio which you missed its call can send a Call
Alert page to your radio. The sender also able to
know that your radio is active.

Note:

This feature must be preprogrammed by a
qualified radio technician.

Receiving a Call Alert Page

When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The
call received icons blinks and the display shows 

Page

received

.

Press any button to clear the Call Alert page.

You cannot send a Call Alert page.

Emergency Operation

The Emergency feature is used to indicate a critical
situation.

If the 

Top (Orange)

 button is preprogrammed to send

an emergency signal, this signal overrides any other
communication over the selected channel.

Your radio supports the following Emergency modes:

• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm

Check with your dealer or system administrator for
more information on the programming of this feature.

Only 

one

 of the Emergency modes above can be

assigned to the preprogrammed 

Emergency

 button.

Note:

To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
technician.

Advanced Features

49

English

Summary of Contents for ASTRO APX 1000 Series































































































Reviews:

No comments