manualshive.com logo in svg

Motorola ASTRO 25 GTR 8000, Manual, Page: 28 / 309

Share
Download
Motorola ASTRO 25 GTR 8000 Manual Download Page 28

Related Information

In addition to the information in the table, see the Related Information Guide.

Related Information

Purpose

Standards and Guidelines for Communi-
cation Sites

Provides standards and guidelines that should be followed when
setting up a Motorola Solutions communications site.
This may be purchased on CD 9880384V83, by calling the North
America Parts Organization at 800–422–4210 or the international
number at 302–444–9842.

System Overview and Documentation

Provides an overview of the ASTRO

®

 25 new system features, docu-

mentation set, technical illustrations, and system-level disaster re-
covery that support the ASTRO

®

 25 radio communication system.

Dynamic System Resilience Feature
Guide

Provides all the information required to understand, operate, main-
tain, and troubleshoot the Dynamic System Resilience feature.

Conventional Operations

Provides the information required to understand and operate the
conventional GTR 8000 Base Radio in a Centralized or Distributed
Conventional Architecture.

Conventional QUANTAR Replacement
Guide

Provides instructions for replacing conventional QUANTARs

®

 with

conventional analog, digital and mixed mode GTR 8000 base radios.
Also provides detailed comparisons of the devices.

Trunked IP Simulcast Subsystem Re-
mote Site
HPD Standalone System - Infrastructure

Repeater Site Infrastructure Reference
Guide

Provides the information required to understand and operate the
GTR 8000 Base Radio in an ASTRO

®

 25 trunked site.

Quick Guide for Replacing a Trunked
3600 QUANTAR with a GTR 8000 Base
Radio

Provides instructions for replacing trunked 3600 QUANTARs

®

 with

GTR 8000 base radios and GTR 8000 Expandable Site Subsystem.
Also provides detailed comparisons of the devices.

MN003286A01-E
About GTR 8000 Base Radio

28  

Summary of Contents for ASTRO 25 GTR 8000






















































































































































































































































































































Reviews:

No comments