Motorola ASTRO 25 GTR 8000 Manual Download Page 129

Page: 129 / 309

Figure 52: VoyenceControl Dashboard

In the left navigation pane, expand

Networks

, then select

ASTRO 25 Radio Network

, then

Views

The list of options expands.

From the navigation pane, double-click

Motorola <device>

The view opens and all currently discovered devices appear.

From the menu, select

Tools

→

OS Inventory

A list of the OS images appears.

Verify OS images loaded on the UNC server appear in the OS inventory.

NOTICE:

These images were automatically created during the

Loading Device OS

Images to the UNC on page 126

procedure.

Under

Networks

in the navigation pane, select one or more devices from the same device class

by right-clicking the selections.

From the menu, select

Update OS Image

From the

Select OS Image

window, select

Software Image

. Click

Next

From the

Update OS Image

window, select each device that appears in the

Selected Devices

section.

This action associates a version to a device instance.

NOTICE:

In most cases, the “summary of device partitions” is already set up and the

values in

step 11

through

step 14

must be verified.

Select

nvm partition

from the

Manage Partition for Device

section.

MN003286A01-E

Chapter 3: GTR 8000 Base Radio Installation

129

Summary of Contents for ASTRO 25 GTR 8000





















































































































































































































































































































Search results

Summary of Contents for ASTRO 25 GTR 8000

Reviews:

Motorola ASTRO 25 GTR 8000, Manual, Page: 129 / 309

Search results

Summary of Contents for ASTRO 25 GTR 8000

Reviews: