b
Using a T15 bit, remove the two screws holding the antenna relay to the backplane cover
and remove the antenna relay.
5
Replace the antenna relay to the base radio, as follows:
a
Using a T15 bit, attach the new antenna relay using the screws removed in step 4b, and
torque to 15 in-lb.
b
Attach all cables and tighten the coax connectors.
6
Set the rocker switch on the front of the power supply to the On (I) position.
7
Place the base radio in Normal Mode, as follows:
a
From the menu, select
Service
→
Test and Measurement Screen
.
b
Click
Change to Normal Mode
.
c
At the confirmation screen, click
OK
.
The base radio halts activity in the current mode and switches operation to the requested
mode.
MN003286A01-E
Chapter 9: GTR 8000 Base Radio FRU Procedures
263