Protecting & Monitoring Your Wireless Network
SBG6782-AC Wireless Cable Modem & Router
•
User Guide
29
365-095-23865 x.1
5.
Enter a name for the user profile that you want to create in the Description field.
6.
Enter the 12-digit (hexadecimal) MAC address of the device for which you are creating
Parental Controls in the MAC Address field.
7.
Enter the web address of the Internet site that you want to block or access.
8.
Enter the Starting port number of the in the Start Port field.
9.
Enter the Ending port number in the End Port field.
10.
Select the days of the week that you want to allow the selected user to access the Internet.
11.
Select the time range that you want to allow the selected user to access the Internet.
12.
Select to
Allow
or
Block
Internet access for the time and days you set previously.
13.
Select
On
or
Off
in the Enabled field to enable or disable this Parental Control restriction.
14.
Click
Apply
, when done.
Set Up Port Triggers
You can use Port Triggers to configure dynamic triggers to specific devices on the LAN. This
allows special applications that require specific port numbers with bi-directional traffic to function
properly. Applications such as video conferencing, voice, gaming, and some messaging program
features may require these special settings.
To configure Port Triggers:
1.
From any screen, click the
Advanced-Port Triggers
menu link or click the Advanced menu
button on the SBG6782-AC Main Menu and then select
Port Triggers
.
2.
Click
Create Port Triggers
button to open the Add Port Triggering Entry window.
Figure 20 – Advanced Port Triggers Screen
3.
Enter the starting port number of the Port Trigger range in the Trigger Start Port field.
4.
Enter the ending port number of the Port Trigger range in the Trigger End Port field.
5.
Enter the starting port number of the Port Trigger range in the Target Start Port field.
6.
Enter the ending port number of the Port Trigger range in the Target End Port field.
7.
Select
TCP
,
UDP
, or
Both
from the Protocol drop-down list.
8.
Select
On
to activate IP port triggers or
Off
to disable IP port triggers.
9.
Click
Apply
to create your port triggers.
