• At the desired Fireground zone and channel,
press the preprogrammed
Monitor
button and
listen for activity. Adjust the
Volume Control
Knob
if necessary.
• If your radio is working in Fireground Zone
Channel, proceed to next step.
4
Press and hold the
PTT
button to transmit. The LED
lights up solid red while transmitting. Talk into the
microphone clearly if needed.
5
Release the
PTT
button to receive.
You hear a Transmit End Tone.
Sending Evacuation Tone
This feature enables the evacuation tone to be heard on
the transmitting radio and on any radio that is able to
receive the tone instruction.
Press and hold the
PTT
button and then short press
the
Top (Orange)
button.
Once the tone begins to sound, if the orange button is
released the tone continues to alarm on all radios within the
talkgroup, until the
PTT
button is released.
NOTICE:
Radio does not transmit evacuation tone if the radio
is in secure mode.
Responding to Evacuation Indicator
The Incident Commander can trigger one of sixteen
Tactical Alerts from the Command Terminal. These alerts
can target individuals or groups of users within the
Fireground Communication System. The ergonomic (visual
and audible) response for the Tactical Alerts can be
customized.
Your radio sounds the audible response at the profile
maximum alert tone volume level. The display shows the
configurable programmed alert text and intelligent lighting.
Perform one of the following actions:
• Press the radio
Top Side
button.
English
68
