Turning Scan On or Off
Press the preprogrammed
Scan
button to toggle
SCAN ON
or
SCAN OFF
to initiate or stop scan.
If the scan is enabled, the display shows
SCAN ON
and the scan status icon.
If the scan is disabled, the display shows
SCAN OFF
.
Making a Dynamic Priority Change
(Conventional Scan Only)
While the radio is scanning, the dynamic priority change
feature allows you to temporarily change any channel in a
scan list (except for the Priority-One channel) to the
Priority-Two channel.
This change remains in effect until scan is turned off. Scan
then reverts to the preprogrammed (original) setting.
• Making a Dynamic Priority Change using the
preprogrammed
Dynamic Priority
button:
a. When the radio locks onto the channel
designated as the new Priority-Two channel,
press the preprogrammed
Dynamic Priority
button.
The radio continues scanning the remaining
channels in the list.
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed “nuisance” channel), you can temporarily remove
the unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
NOTICE:
Deleting a nuisance channel is
only
possible
through the preprogrammed
Nuisance Channel
Delete
button.
When the radio is locked onto the channel to be
deleted, press the preprogrammed
Nuisance Delete
button.
The radio continues scanning the remaining channels in
the list.
English
58
