Motorola APX 2000 MODEL 2 User Manual Download Page 86

Page: 86 / 177

Man Down is an alternate way to activate the
Emergency feature on the condition the Emergency
must be set up for this feature to operate.

See

Man Down

on page 86 for details.

Sending an Emergency Alarm

This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.

Note:

Emergency button press timer by default is set

to 1 second. This timer is programmable from 0 – 6
seconds by a qualified technician.

Press the preprogrammed

Emergency

button.

One of the following scenarios occurs:

• The display shows

Emergency

and the current

zone or channel. You hear a short medium-
pitched tone and the LED blinks red
momentarily.

• You hear the radio sounds a short low-pitched

tone to indicate that the selected channel does
not support emergency and rejects to launch
emergency mode. The display shows

emergency

, if the selected channel does not

support emergency.

When you receive the dispatcher’s acknowledgment,
the display shows

Ack received

. You hear four

tones, the alarm ends, and the radio exits the
Emergency Alarm mode.

If no acknowledgement is received, the display shows

No acknowledge

. The alarm ends when the timer

expires and the radio exits the Emergency Alarm
mode.

Sending an Emergency Call (Trunking Only)

This feature gives your radio priority access to a
talkgroup.

Press the preprogrammed

Emergency

button.

One of the following scenarios will occur:

• The display shows

Emergency

on the current

zone and channel. You hear a short medium-
pitched tone and the LED blinks red
momentarily.

• You hear the radio sounds a short low-pitched

tone to indicate the selected channel does not

Advanced Features

English

Summary of Contents for APX 2000 MODEL 2


















































































































































































Search results

Summary of Contents for APX 2000 MODEL 2

Reviews:

Related manuals for APX 2000 MODEL 2

Brands by name

Popular brands

Motorola APX 2000 MODEL 2, User Manual

Search results

Summary of Contents for APX 2000 MODEL 2

Reviews:

Related manuals for APX 2000 MODEL 2

Brands by name

Popular brands