Motorola APX 2000 MODEL 2 User Manual Download Page 158

Page: 158 / 177

Battery Care

Battery Charge Status

Your radio can indicate the battery’s charge status
through:

• the LED and sounds.
• the fuel gauge icon on the display.

You can also check the battery charge status via the
menu entry. See

IMPRES Battery Annunciator

page 147 for more information.

LED and Sounds

When your battery is low:

• the LED blinks red when the

PTT

button is

pressed.

• you hear a low-battery “chirp” (short, high-pitched

tone).

Fuel Gauge Icons

A blinking fuel gauge icon ( ) is displayed only when
the battery voltage drops to low level. In this case,
replace the battery with a fully charged one.

Gauge

Battery Charge

76% to 100% full*

51% to 75%*

26% to 50%*

11% to 25%*

10% or less (at 10%, the gauge
begins blinking)

*These are for IMPRES battery operation only.

Battery Recycling and Disposal

In the U.S. and Canada, Motorola participates in the
nationwide Rechargeable Battery Recycling
Corporation (RBRC) program for battery collection

Helpful Tips

154

English

Summary of Contents for APX 2000 MODEL 2


















































































































































































Search results

Summary of Contents for APX 2000 MODEL 2

Reviews:

Related manuals for APX 2000 MODEL 2

Brands by name

Popular brands

Motorola APX 2000 MODEL 2, User Manual

Search results

Summary of Contents for APX 2000 MODEL 2

Reviews:

Related manuals for APX 2000 MODEL 2

Brands by name

Popular brands