manualshive.com logo in svg

Motorola AP-7131N-FGR, Installation Manual, Page: 55 / 66

Share
Download
Motorola AP-7131N-FGR Installation Manual Download Page 55

Regulatory Compliance

51

Note: The certification mark applied to the AP7131N is for Restrict Radiation Equipment. This 
equipment operates on a secondary basis and does not have the right for protection against harmful 
interference from other users including same equipment types. Also this equipment must not cause 
interference to systems operating on primary basis.

For more information consult the website 

www.anatel.gov.br

Declarações Regulamentares para AP7131N - Brasil

Nota: A marca de certificação se aplica ao  Transceptor, modelo AP-7131N. Este equipamento opera 
em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de 
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. 
Para maiores informações sobre ANATEL consulte o site: 

www.anatel.gov.br

Chile

Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, 
relativa a radiaciones electromagnéticas.

This device complies with the Resolution Not 403 of 2008, of the Undersecretary of 
telecommunications, relating to electromagnetic radiation.

Mexico

Restrict Frequency Range to: 2.450 – 2.4835 GHz.

Taiwan

NOTICE!

According to:  Administrative Regulations on Low Power Radio Waves Radiated Devices

Article 12

Without permission granted by the DGT, any company, enterprise, or user is not allowed to change 
frequency, enhance transmitting power or alter original characteristic as well as performance to a 
approved low power radio-frequency devices.

Article 14

The low power radio-frequency devices shall not influence aircraft security and interfere legal 
communications; If found, the user shall cease operating immediately until no interference is 
achieved. The said legal communications means radio communications is operated in compliance 
with the Telecommunications Act. The low power radio-frequency devices must be susceptible with 
the interference from legal communications or ISM radio wave radiated devices.  

Summary of Contents for AP-7131N-FGR



































































Reviews:

No comments