Motorola AP-7131N-FGR, Installation Manual, Page: 40 / 66

Motorola Solutions AP-7131N-FGR Access Point Installation Guide 36
7. Select the WLAN #1 tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
its ESSID security scheme for basic operation.
a. Enter the Extended Services Set Identification (ESSID) and name associated with the
WLAN.
b. Use the Available On checkboxes to define whether the target WLAN is operating over
the 802.11a/n or 802.11b/g/n radio. Ensure the radio selected has been enabled
(see step 8).
8. Once the WLAN’s radio designations have been made, the radio must be configured in
respect to intended 2.4 or 5 GHz radio traffic and the antennas used. Refer to
Network
Configuration -> Wireless -> Radio Configuration -> Radio1 (or Radio2) , and
configure the Radio Settings field (at a minimum). If you know the radio’s Properties,
Performance and Beacon Settings, those fields can also be defined at this time.
Define the Channel Settings, Power Level and 802.11 mode in respect to the 2.4 or 5 GHz
802.11b/g/n or 802.11a/n radio traffic and anticipated gain of the antennas.
NOTE
A maximum of 16 WLANs are configurable within the access point
Wireless Configuration screen. The limitation of 16 WLANs exists
regardless of the number of radios supported.
CAUTION
Only a qualified wireless network administrator should set the access
point radio configuration. Refer to the
AP-7131N -FGR Access Point
Product Reference Guide for an understanding of the configurable
values involved and their implications. To access the guide, go to
https://portal.motorolasolutions.com/Support/US-EN
NOTE
Even an access point configured with minimal values must protect its
data against theft and corruption. A security policy should be configured
for WLAN1 as part of the basic configuration outlined in this guide. A
security policy can be configured for the WLAN from within the Quick
Setup screen. Policies can be defined over time and saved to be used as
needed as the access point’s security requirements change. Motorola
Solutions recommends you familiarize yourself with the security options
available on the access point before defining a security policy.
!