Motorola 8400 User Manual Download Page 9

Page: 9 / 74

Safety

English

Safety Standards

This Cellular Telephone complies with

all applicable RF safety standards.

This cellular telephone meets the standards and recommendations for the
protection of public exposure to RF electromagnetic energy established by
governmental bodies and other qualified organisations, such as the following:

•

Verband Deutscher Elektroingenieure (VDE) DIN-0848

•

Directives of the European Community, Directorate General V in
Matters of Radio Frequency Electromagnetic Energy

•

National Radiological Protection Board of the United Kingdom. GS-
11, 1988.

•

American National Standards Institute (ANSI)/IEEE. C95. 1-1992

•

National Council on Radiation Protection and Measurements
(NCRP). Report 86

•

Department of Health and Welfare Canada, Safety Code 6.

Battery Safety

•

To prevent injury or burns, do not allow metal objects to contact or short
circuit the battery terminals.

•

Make sure that the battery terminals do not touch greasy objects.

•

Do not immerse the battery in water, or dispose of in a fire.

•

Ensure that the battery is disposed of using the proper facilities.

•

If you need to replace the battery, make sure that you use only the
approved battery type.

•

The use of other types of batteries might affect your phone and in such
cases the manufacturer assumes no liability.

Summary of Contents for 8400











































































Search results

Summary of Contents for 8400

Reviews:

Related manuals for 8400

Brands by name

Popular brands

Motorola 8400, User Manual

Search results

Summary of Contents for 8400

Reviews:

Related manuals for 8400

Brands by name

Popular brands